Shop replacement repair parts for Kelvinator Dryer model DET250K1W

Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

Door Catch

Bearing cup for drum support ball

High temp adhesive

Air duct seal

Door strike

Main terminal block for power cord

Clip,top-to-front

Condenser coil cleaning brush

Door catch kit

Cycling thermostat with bias heater

Dryer power cord. This cord is 6 feet long 4 wire

Grounding ball