Shop replacement repair parts for Amana Furnace model GUC045B30B/P1106901F

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

.43 Natural gas burner orifice

Panel latch 1/4 turn

Screw, 8-18 x 1/2

Blower wheel 10" x 10"

Flame sensor

Hot Surface Ignitor With 5-1/2" Leads, A Style Mounting Block, Sealed Combustion, Insulation 200°C, Electrical Connection, Molex Internal Keyed Connector with .093" Male Pins, Includes Gasket, Replaces R/S 41-401

Run capacitor, Single, Oval, 370 Volts, 5 Microfarads

Manual reset limit switch

Screw-tc

Grommet

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Drain tube

Screw
