Price Match GuaranteeAmana Furnace GUI090X30A/P1174504F Parts
Shop replacement repair parts for Amana Furnace model GUI090X30A/P1174504F
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Gas valve, 24v 3.5" wc
.43 Natural gas burner orifice
Panel latch 1/4 turn
Pressure switch hose 3/16" I.D.
Ignition Control Board. The ignition control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.
10 mfd cap 440v oval
Blower wheel 10" x 10"
Flame sensor
Hot Surface Ignitor With 5-1/2" Leads, A Style Mounting Block, Sealed Combustion, Insulation 200°C, Electrical Connection, Molex Internal Keyed Connector with .093" Male Pins, Includes Gasket, Replaces R/S 41-401
Run capacitor, Single, Oval, 370 Volts, 5 Microfarads
Manual reset limit switch
Screw-tc
Grommet
Draft inducer motor, 115 volts, 3000 RPM. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic