LG Washing Machine FH069FD7F Parts

The 4681EA2001T Washing Machine Drain Pump and Motor Assembly is a genuine OEM replacement part that expels water from your washing machine or washer/dryer combo. This high-quality component ensures proper drainage. It's compatible with Kenmore, LG, and Kenmore Elite models.

Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

Shock absorber kit

Door lock assembly

Washing machine short shipping bolt assembly. Keeps the tubs from moving during shipping to prevent damage.

Washing machine tub seal between outer & inner tubs

Washing machine tub seal. Located between the front outer tub and rear outer tub. If the washing machine is leaking water from between these two tubs, this seal is likely damaged or worn out.

Washing machine filter and trap assembly.

Shock Retaining Pin

Washing machine drain hose with bellows. This drain hose makes a connection from the washer tub to the drain pump.

Water level pressure switch

Washing machine door boot clamp for front panel.

Circulation pump assembly

Heating element with sensor probe. Element has been changed. May require new wire harness to install. Please see related item.

Washing machine rotor assembly. The rotor interacts with the stator to create a strong electromagnetic field which rotates the tub in either direction. If the magnets on the rotor are damaged, or if any part of the rotor is defective, the washer may not spin or agitate.