LG Washing Machine F1476FDS Parts

The 4681EA2001T Washing Machine Drain Pump and Motor Assembly is a genuine OEM replacement part that expels water from your washing machine or washer/dryer combo. This high-quality component ensures proper drainage. It's compatible with Kenmore, LG, and Kenmore Elite models.

Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

The 6501KW2002B Rotor Position Sensor Assembly is essential for accurately detecting the rotor's position. When this sensor fails, it can trigger an LE error code on the control panel, indicating a malfunction. This sensor is compatible with various Kenmore and LG washer models.

Washer door lock latch assembly. The door lock secures the washer door shut during operation. Once the washing machine door is closed, the washer can begin operating. If the door lock is defective, the washer door will not latch properly.

Inlet hose

Rear tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.

Washer door magnet holder kit. Helps keep door open slightly when machine is not in use.

Washing machine tub seal. Located between the front outer tub and rear outer tub. If the washing machine is leaking water from between these two tubs, this seal is likely damaged or worn out.

Suspension spring

Washing machine filter and trap assembly.

Shock Retaining Pin

Washing machine drain hose with bellows. This drain hose makes a connection from the washer tub to the drain pump.

Water level pressure switch

Dispenser drawer housing

Circulation or drain pump motor & impeller. This pump is found on both washing machines and dishwashers. On washing machines, this pump is used to circulate the water. On dishwashers, it is used to drain water from the dishwasher.