Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment Repair>Briggs & Stratton Generator Muffler Replacement #189008GS
Briggs & Stratton Generator Muffler Replacement #189008GS
Skill Level
Total Parts Cost
$69.92Estimated Savings
$112.5002:22
- Description
This video provides step-by-step instructions for replacing the muffler on Briggs and Stratton generators. The most common reason for replacing the muffler is if the generator is too noisy.
All of the information in this muffler replacement video is applicable to the following brands: Briggs & Stratton, Craftsman, Snapper, Troy-Bilt
Tools used: 10mm socket
All of the information in this muffler replacement video is applicable to the following brands: Briggs & Stratton, Craftsman, Snapper, Troy-Bilt
Tools used: 10mm socket
Step By Step Instructions
1
Before you replace the muffler assembly on your generator first make sure the engine and muffler have cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a 10 mm socket to remove the mounting bolts securing the muffler assembly to the support bracket.
4
Now use a 6 mm Allen wrench to unthread the muffler flange mounting bolts.
5
Pull the old muffler assembly free.
6
Before you install the new muffler assembly make sure the flange gasket is in place.
7
Now position the new muffler assembly and rethread the flange mounting bolts to secure.
8
Next, replace the bolts to secure the assembly to the support bracket.
9
Reattach the wire and boot to the spark plug and your generator should be ready for use.
Description
This video provides step-by-step instructions for replacing the muffler on Briggs and Stratton generators. The most common reason for replacing the muffler is if the generator is too noisy.
All of the information in this muffler replacement video is applicable to the following brands: Briggs & Stratton, Craftsman, Snapper, Troy-Bilt
Tools used: 10mm socket
All of the information in this muffler replacement video is applicable to the following brands: Briggs & Stratton, Craftsman, Snapper, Troy-Bilt
Tools used: 10mm socket
Step-By-Step Instructions
1
Before you replace the muffler assembly on your generator first make sure the engine and muffler have cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a 10 mm socket to remove the mounting bolts securing the muffler assembly to the support bracket.
4
Now use a 6 mm Allen wrench to unthread the muffler flange mounting bolts.
5
Pull the old muffler assembly free.
6
Before you install the new muffler assembly make sure the flange gasket is in place.
7
Now position the new muffler assembly and rethread the flange mounting bolts to secure.
8
Next, replace the bolts to secure the assembly to the support bracket.
9
Reattach the wire and boot to the spark plug and your generator should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com