Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment Repair>GE Dishwasher Rinse Aid Container Replacement #WD12X10264
GE Dishwasher Rinse Aid Container Replacement #WD12X10264
Skill Level
Total Parts Cost
$38.34Estimated Savings
$112.5001:40
- Description
This video provides step-by-step instructions for replacing the rinse aid container on GE and Hotpoint dishwashers. The most common reason for replacing the container is if it is not dispensing the rinse aid during the final rinse cycle.
All of the information in this rinse aid container replacement video is applicable to the following brands: GE, Hotpoint
All of the information in this rinse aid container replacement video is applicable to the following brands: GE, Hotpoint
Step By Step Instructions
1
As with any repair, be sure to turn off the power supply to your dishwasher before beginning.
2
To replace the rinse aid dispenser, your first step is to remove the screws which secure the inner and outer door panels together.
3
Separate the panels and unthread the rinse aid cap.
4
Now squeeze the tabs on the dispenser fill port and pull the old dispenser out of the inner panel.
5
Install the new rinse aid dispenser by first hooking the metal arm onto the dispenser lever then snap the dispenser into place.
6
Replace the rinse aid cap.
7
Realign the inner and outer door panels making sure the door latch lever is properly positioned.
8
Replace the screws in the inner panel to secure.
9
Be aware that the fine thread screws are intended for the two bottom screw holes.
10
With the new dispenser installed you’re now ready to turn the power supply back on and confirm that the dishwasher is functioning properly.
Description
This video provides step-by-step instructions for replacing the rinse aid container on GE and Hotpoint dishwashers. The most common reason for replacing the container is if it is not dispensing the rinse aid during the final rinse cycle.
All of the information in this rinse aid container replacement video is applicable to the following brands: GE, Hotpoint
All of the information in this rinse aid container replacement video is applicable to the following brands: GE, Hotpoint
Step-By-Step Instructions
1
As with any repair, be sure to turn off the power supply to your dishwasher before beginning.
2
To replace the rinse aid dispenser, your first step is to remove the screws which secure the inner and outer door panels together.
3
Separate the panels and unthread the rinse aid cap.
4
Now squeeze the tabs on the dispenser fill port and pull the old dispenser out of the inner panel.
5
Install the new rinse aid dispenser by first hooking the metal arm onto the dispenser lever then snap the dispenser into place.
6
Replace the rinse aid cap.
7
Realign the inner and outer door panels making sure the door latch lever is properly positioned.
8
Replace the screws in the inner panel to secure.
9
Be aware that the fine thread screws are intended for the two bottom screw holes.
10
With the new dispenser installed you’re now ready to turn the power supply back on and confirm that the dishwasher is functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com