Snapper Parts

Tecumseh carburetor repair kit. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run poorly.

Husqvarna fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.

Briggs & Stratton Original Equipment 491588S Air Filter. Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines.

Fuel shut-off valve

Auger blade kit with scraper blade & support

Tecumseh ignition coil (also called a lamination). The ignition coil sends voltage to the spark plug while the engine is running. If the ignition coil is defective, the engine may not start.

Small engine recoil starter assembly. This item includes the pulley and spring. The recoil starter engages the drive cup on the flywheel to start the engine when pulled.

Briggs and Strartton in-line fuel filter with 40 micron rating and 1/4" inlet & outlet. If the engine does not start then the fuel filter may be clogged and not allowing enough fuel to enter the carburetor.

Primer bulb

Briggs & Stratton Original Equipment 492932S Oil Filter. Length: 2 1/4 inches. For optimum performance, we recommend changing the oil in your small engine after the first five hours of use. After that, change the oil on a yearly basis or after every 50 hours of use (whichever comes first).

Fuel pump. If this fuel pump is being installed on a Intek V-Twin engine originally equipped with a metal fuel pump, related item 1567967. The fuel pump supplies fuel to the carburetor while the engine is running. If the fuel pump is clogged, the engine may not start or may run rough.

Tecumseh carburetor bowl gasket. If this gasket is torn or damaged, the engine may run rough. Be sure to clean the surfaces around the carburetor gasket before installing it.

Chainsaw fuel cap with retainer

Fuel line (Large). The fuel line allows fuel to travel from the fuel tank to the carburetor and from the primer bulb to the fuel system.

Briggs & Stratton snowblower shear bolt kit. 1/4-20 x 1 3/4". Shear bolts are designed to break in half if the auger strikes a hard object to prevent damage to the transmission and engine. If the shear bolt is broken, the auger won’t be able to turn.